Viofo A229 Pro Firmware
Firmware Updates For the Viofo A229 Pro
Update Instructions
1. Download the firmware file
2. Unzip (if needed) the FWA229P.bin file using available unzip programs, e.g. WinZip or 7-Zip
3. Copy the FWA229P.bin file directly onto the microSD card root file, not in any folders (card must be in Fat32 format - formatting the card inside the camera will make it Fat32). Using a card reader is the recommended way to get the file onto the memory card.
4. Insert the microSD card into the camera and power it on via a 5V/1A power source, e.g. USB wall charger, cigarette lighter car adapter or power bank, it will start upgrade automatically. Do not use your computers USB ports!
5. While upgrading, the front REC red LED starts blinking (the light blinks slowly at the beginning, then blinks quickly), when the lights stop blinking, that means the upgrade is finished. The camera will restart and the firmware file will be deleted automatically.
6. IMPORTANT!! Now go into the menu and manually default your cameras settings. Do not miss this step!
7. Once the camera restarts, use a paper clip, or something similar, and press the reset button on the side of the camera. There is the letter R just above the reset button hole on the left side of the camera. Press and hold the reset button for about 5 seconds. This will clear the memory buffer.
2. Unzip (if needed) the FWA229P.bin file using available unzip programs, e.g. WinZip or 7-Zip
3. Copy the FWA229P.bin file directly onto the microSD card root file, not in any folders (card must be in Fat32 format - formatting the card inside the camera will make it Fat32). Using a card reader is the recommended way to get the file onto the memory card.
4. Insert the microSD card into the camera and power it on via a 5V/1A power source, e.g. USB wall charger, cigarette lighter car adapter or power bank, it will start upgrade automatically. Do not use your computers USB ports!
5. While upgrading, the front REC red LED starts blinking (the light blinks slowly at the beginning, then blinks quickly), when the lights stop blinking, that means the upgrade is finished. The camera will restart and the firmware file will be deleted automatically.
6. IMPORTANT!! Now go into the menu and manually default your cameras settings. Do not miss this step!
7. Once the camera restarts, use a paper clip, or something similar, and press the reset button on the side of the camera. There is the letter R just above the reset button hole on the left side of the camera. Press and hold the reset button for about 5 seconds. This will clear the memory buffer.
*Update process may very slightly from above (lights may flash differently).
____________________________________________________________________
Change Log:
1.Added: Super Night Vision
2.Added: Stamp color option
3.Added: Privacy mode
____________________________________________________________________
Change Log:
1.Added: Super Night Vision
2.Added: Stamp color option
3.Fixed: Other bugs
____________________________________________________________________
Front Camera Firmware: V1.3_240612
Change Log:
Added: 1.Bluetooth Button Function Settings.
2. Rear Camera HDR Settings.
3. 21:9 Resolution
4. Parking HDR Settings
5. Daylight Saving Settings and so on.
Optimized: Footage File Name
Fixed some bugs.
____________________________________________________________________
Rear Camera Firmware: V1.3_240605
Change Log:
1. Added HDR settings.
2. Other bugs fixed.